AX with offset tips that loosen the soil over the entire working width without disturbing the soil structure. These are the only machines on the market that loosen the soil over the entire working width, and not only during the work of the working tool. Even crevices are maintained over the entire width for a uniform working surface, the soil is lifted over the entire width. Loosened soil without changes in its structure gives many advantages.
The AX subsoiler provides the so-called wave effect, the bent tip of the blade exerts vertical pressure, which ensures uniform lifting of the soil. The strip of earth then returns to its place undamaged, and this ensures perfect structural continuity to create effective porosity and facilitate root penetration.
MAIN ADVANTAGES OF THE MACHINE
⇨ Extremely high machine patency due to ground clearance and blade spacing.
⇨ Uniform lifting – intact structure – favorable water and air flow. By loosening the soil with the AX subsoilers, you can achieve incomparable fissures.
⇨ The main supporting frames of the machine are made of high-strength steel
⇨ Non-stop spring overload protection for extremely hard or stony soil.
⇨ The hassle-free way to quickly replace worn working chisels.
⇨ Lower power demand by about 30% compared to traditional subsoilers
APPLICATIONS OF THE AX SUBSOILER
+ Deep loosening with breaking the plow sole and creating perfect soil conditions for the next sowing, while reviving the soil climate (more air and water).
+ Coverage of agricultural fertilizers in one machine pass. You can cover with organic or mineral fertilizers, applied even in a larger dose per hectare.
+ Coverage of a large amount of crop residue in a single pass, such as grain maize, rapeseed, etc.
+ Work even in very wet conditions, e.g. in late autumn or winter. The AX is a machine that provides maximum ground clearance.
AXE
Standard equipment
➲ Frame – the main beam 200×200 mm
➲ 3-point hitch cat. III
➲ spring protection
➲ stable support foot
➲ adjustable working depth of the roller (multi-stop)
➲ tooth blades 30×750 made of HARDOX 500 steel
➲ coulter spacing 75 cm
➲ ground cleareance 100 cm
➲ varnish coating with improved parameters
OPTIONAL ROLLERS
STEEL-PACK Ø600 mm
V-RING/T-RING Ø600 mm
SPIKED TANDEM Ø520 mm
STEEL-PACK Ø600 mm
Constructed of closed, pair-welded steel plates with toothed working edges. Between the disabled disks there are simple baubles. The roller shreds the soil very well and compacts it to a depth thanks to the high weight and narrow working edges of the discs. Cuts clods and crushes clods, pushes stones deep into the soil. In cultivation, stubbles of post-harvest ingredients are well mixed with the soil. Thanks to the surface of the shaft, there is no tendency to stick.
V-RING/T-RING Ø600 mm
V/T shape ring construction with adjustable scrapers. This roller is used on lumpy soils and soils with a tendency to dry out quickly. Thanks to the use of the roof roller, the clods are fragmented, and the ring construction of the roller compacts the roller in strips, significantly affecting the better soaking of the soil.
SPIKED TANDEM Ø520 mm
The rollers are designed for cultivation of all types of soil. Their design results in a perfect crushing and compaction of post-harvest residues. The weight and tandem of the rollers contribute to the machine’s stability, proper field leveling and soil compaction.
ACCESSORIES
SPECIFICATION
RIGID FRAME, MOUNTED
|
|
|---|---|
3
|
|
4208
|
|
150 - 350
|
|
1550
|
|
2150
|
|
3
|
|
3
|
|
4
|
|
15 - 45
|
|
75
|
|