JACEK cultivation and meadow rollers are hydraulically folded and pulled by modern machines in which we use the following working elements:
• Cambridge rings with a diameter of 500, 530, 600 mm, they are primarily intended for pre- and post-sowing cultivation
• Zig-zag rings with a diameter of 530 mm, intended for pre-sowing cultivation and crushing of clods in fields and grasslands.
These rollers have a simplified unfolding system, where after unlocking the beam blocking the frame segments, the machine unfolds the side sections when reversing. Then all roller sections are lowered by means of the actuator. The rollers can also be successfully used for post-harvest cultivation in order to accelerate the decomposition of straw and post-harvest residues and the germination of shed seeds, including weed seeds. These machines are also used on grasslands.
Cultivation roller JACEK
The most ergonomic of the shaft family, its design and simplicity allow for the maximum result of the machine operation at the lowest possible cost of execution. The simplified unfolding system uses only one hydraulic cylinder, where it is enough to unfasten the pin from the beam blocking the frame segments.
All EXPOM rollers have an optional European approval, which entitles them to move on roads throughout Europe. Our trailed, hydraulically folded cultivation rollers are subject to approval. To meet all the conditions, our machines have been equipped with a number of certified and safety-tested elements. Simple single-point hitch, sharp working elements on the edges of the transport width have been secured and have passed all tests.
JACEK
Standard equipment
➲ upper|lower hitch of the tractor
➲ stable support foot
➲ frame with one hydraulic cylinder
➲ blocking strip of the frame segments
➲ working elements to choose from Cambridge, Zig-zag
➲ road wheels: 10.0/75 – 15.3 for version 5,3 and 6,3 m
➲ road wheels: 11.5/80 – 15.3 for version 8 and 9 m
➲ road wheels: 400/60 – 15.5 for version with Cambridge Ø600 mm rings
➲ varnish coating with improved parameters
OPTIONAL ROLLERS
CAMBRIDGE
ZIG-ZAG Ø530 mm
CAMBRIDGE
Intended for cultivation before and after sowing. Leveling the field and breaking lumps, improving the contact of seeds with soil, which significantly affects the uniformity of emergence, retaining moisture, reducing soil erosion, improving soil structure. The rollers can also be successfully used for post-harvest cultivation in order to accelerate the decomposition of straw and post-harvest residues and the germination of seeds, including weed seeds. They are also used on grasslands.
ZIG-ZAG Ø530 mm
Intended for pre-sowing cultivation. The main advantage of the conical rings used in cultivation is that the fine compacted soil is underneath, loosened, lumpy on top. The roller is ideal for grassland care because during operation it does not damage plants and does not destroy sown seeds. During turning, the shaft self-cleans itself very well due to the transverse movement of the rings relative to each other. Improving the soil structure, leveling the field and breaking up clods, the zig-zag is made for it.
ACCESSORIES
SPECIFICATION
HYDRAULICALLY FOLDABLE, TRAILED
|
||||||||
|---|---|---|---|---|---|---|---|---|
Working width |m|
|
5,3
|
6,3
|
8
|
9
|
||||
Required power |HP|
|
>90-110
|
>100-120
|
>125
|
>140
|
||||
Rollers to choose
|
||||||||
standard CAMBRIDGE Ø500 mm
|
2100 kg
|
Id 1706
|
2400 kg
|
Id 1707
|
3460 kg
|
Id 1709
|
3760 kg
|
Id 1725
|
standard CAMBRIDGE Ø530 mm
|
2360 kg
|
Id 1711
|
2690 kg
|
Id 1712
|
3690 kg
|
1714
|
4020 kg
|
Id 1726
|
standard CAMBRIDGE Ø600 mm
|
2630 kg
|
Id 1731
|
3050 kg
|
Id 1727
|
-
|
-
|
||
standard ZIG-ZAG Ø530 mm
|
2640 kg
|
Id 1751
|
3060 kg
|
Id 1752
|
4380 kg
|
Id 1754
|
4800 kg
|
Id 1755
|
PARAMETERS
HYDRAULICALLY FOLDABLE, TRAILED
|
||||||||
|---|---|---|---|---|---|---|---|---|
|
Working width |m|
|
5,3
|
6,3
|
8
|
9
|
||||
Transport width |mm|
|
2030
|
2400
|
2400
|
2450
|
||||
Transport length |mm|
|
4300
|
4550
|
5480
|
6040
|
||||
Transport height |mm|
|
1500
|
1670
|
1670
|
1770
|
||||